home

Home

about-us

About Us

shipping-returns

Shipping & Returns

contact-us

Contact Us

all-products

All Products

accessories

Accessories

rock-n-roller-cart

Rock-N-Roller Cart

rf-venue

RF Venue

furman-power

Furman Power

soundtools-by-dave-rat

SoundTools by Dave Rat

audio

Audio

microphones

Microphones

atmospheric-effects

Atmospheric Effects

stage-lighting

Stage Lighting

daslight

Daslight

sunlite

Sunlite

audinate-avio

Audinate Avio

Footer

Header

The Dante AVIO AES3/EBU Adapter supports 2x2 channels, with high-quality XLR input and output connectors and built-in asynchronous sample rate conversion. Use the AES3 Dante AVIO Adapters to add Dante networking to amplifiers, speaker processors, mixing consoles, video systems and more.

Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features one balanced, line-level output equipped with an XLR connector and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Note: Requires the use of a network switch with POE (Power-over-Ethernet) capabilities or the use of an 802.3af-compliant PoE injector device (both available separately).

Key Features
Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation 
Balanced, line-level single-channel analog output adapter
Compact and built for the road with sonically welded polycarbonate enclosure
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)
Applications
Send audio to analog power amplifiers and powered speakers over a Dante audio network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO input and output adapters
Create easy drop points for connecting overflow areas to a Dante network
Connect non-networked hearing aid loop amplifiers to your Dante audio network

Features:

Interface with SDI video systems using AES3 audio
Put your AES3-compatible amplifiers and powered speakers on your Dante audio network
Connect AES3-compatible DSPs to a Dante network
Connect AES3-compatible microphone preamplifiers to a Dante network

Audinate Dante AVIO 2x2 AES3/EBU I/O Adapter for Dante Audio Network ADP-AES3-AU-2X2

The Audinate Dante AVIO 2-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.


Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features two balanced, line-level outputs equipped with XLR connectors and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Note: Requires the use of a network switch with POE (Power-over-Ethernet) capabilities or the use of an 802.3af-compliant PoE injector device (both available separately).

Key Features
Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation 
Balanced, line-level dual-channel analog output adapter
Compact and built for the road with sonically welded polycarbonate enclosure
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)
Applications
Send audio to analog power amplifiers and powered speakers over a Dante audio network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO input and output adapters
Create easy drop points for connecting overflow areas to a Dante network
Connect non-networked hearing aid loop amplifiers to your Dante audio network

Audinate Dante AVIO 2-Channel Analog Output Adapter for Dante Audio Network ADP-DAO-AU-0X2

Product Title

The Audinate Dante AVIO 2-Channel Analog Input Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog mixers, DI boxes, keyboard instruments, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.


Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features two balanced line-level inputs equipped with XLR connectors and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Note: Requires the use of a network switch with POE (Power-over-Ethernet) capabilities or the use of an 802.3af-compliant PoE injector device (both available separately).

Key Features
Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation 
Balanced, line-level dual-channel analog input adapter
Compact and built for the road with sonically welded polycarbonate enclosure
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)
Applications
Connect analog mixers and consoles to a Dante network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO Input and Output adapters
Connect stage DI boxes and keyboard instruments directly to a Dante network
Connect wireless mic receiver to a Dante network

Audinate Dante AVIO 2-Channel Analog Input Adapter for Dante Audio Network ADP-DAI-AU-2x0

Provided by third party:
The Dante AVIO USB adapter lets you connect any computer to a Dante audio network with zero software installation, and can be used with any audio application for playout or recording. Ideal for conference rooms and presentation events.


Key Features
Easy audio drop-point for laptops in conference settings, no need to reconfigure your Dante network for different computers
Record or playout 2-channel audio from any PC or Mac with no additional software at all
Connect mobile devices to a Dante network (with USB adapters)

Audinate Dante AVIO 2x2 USB I/O Adapter for Dante Audio Network ADP-USB-AU-2X2

The Audinate Dante AVIO 1-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.


Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features one balanced, line-level output equipped with an XLR connector and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Note: Requires the use of a network switch with POE (Power-over-Ethernet) capabilities or the use of an 802.3af-compliant PoE injector device (both available separately).

Key Features
Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation 
Balanced, line-level single-channel analog output adapter
Compact and built for the road with sonically welded polycarbonate enclosure
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)
Applications
Send audio to analog power amplifiers and powered speakers over a Dante audio network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO input and output adapters
Create easy drop points for connecting overflow areas to a Dante network
Connect non-networked hearing aid loop amplifiers to your Dante audio network

Audinate Dante AVIO 1 Channel Analog output adapter ADP-DAO-AU-0X1

The Audinate Dante AVIO 1-Channel Analog Input Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog mixers, DI boxes, keyboard instruments, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.


Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features one balanced line-level input equipped with an XLR connector and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Note: Requires the use of a network switch with POE (Power-over-Ethernet) capabilities or the use of an 802.3af-compliant PoE injector device (both available separately).

Key Features
Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation 
Balanced, line-level single-channel analog input adapter
Compact and built for the road with sonically welded polycarbonate enclosure
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)
Applications
Connect analog mixers and consoles to a Dante network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO Input and Output adapters
Connect stage DI boxes and keyboard instruments directly to a Dante network
Connect wireless mic receiver to a Dante network

Audinate Dante AVIO 1-Channel Analog Input Adapter for Dante Audio Network ADP-DAI-AU-1X0